
This is an Optional part for:
1/10 Nitro 4-Tec (4807)
Features:
- Pre-assembled shocks
- Only require filling with included oil, attaching included spacers and included springs
- Hard-anodized
- Teflon coated T-6 aluminum
Two (2) Shock Caps (aluminum)
One (1) Bottle of Silicone
Two (2) Aluminum 1" Cylinders
Three (3) Black Rubber Diaphragms
Three (3) Large C-Clips
Two (2) White Plastic Ball Ends
Three (3) Nylon Flat Washers 6mm
Two (2) Metal Bushings
Two (2) Teflon Spacers 5mm
Four (4) Black Plastic Pistons
Six (6) "O" Rings
Two (2) Plastic Spring Retainers
Two (2) Nylon Flat Washers 5mm
Two (2) Black Plastic Spring Spacers
Five (5) Small E-Clips
Two (2) Shock Shafts (1-1/4"x1/8") approximately
Twelve (12) Spring Adjusters (various sizes)
Requires:
C ring or needle nose pliers
Tweezers